Steel Cementitious Ultra Fix System

The SC Ultra fix system is a stringer- less system where the panels are individually screw fixed onto the pedestal heads. This system is widely used for electrical and data cable management, and also for applications where there is a need for an under floor baffle/ plenum or air highway. This system is recommended for applications such as:

• General Offices
• Banks
• Learning Institutions
• Libraries

Built in Expansion Joint and Cut Out:
The panel has a special expansion cut out, and the pedestal head is fitted with an expansion gasket designed to keep the panels separated by 0.3mm at all times. This eliminates the panels clicking or rubbing up against each other during expansion.

4 Corner Screw Panel
Screw hole in each corner to allow panels to be individually screw fixed providing greater rigidity as well as easier and faster access.

Finishing panels
Full bearing 600 x 300mm and 600 x x800mm panels designed to minimize small off cuts around columns and finishing off to the perimeter. The 600 x 300 panel may also be used when there is a necessity for a 300mm x 600mm air grille.

1. Inbuilt Expansion joint gasket
This patented inbuilt expansion joint gasket detail ensures that the panels are held 0.3mm apart

2. Pedestal Head
Pedestal Head is die formed aluminium to form a solid support to mount the access floor to

3. Clip on AT stringer cavity
Cavity for AT stringer attachment

4.Screw Fix Locator
The panel is screw fixed through this locator on every corner

5. Steel thread rod
18mm x 150mm steel thread rod that gives a range of adjustment from 500mm +/- from the FFH

6. Sound Impact Buffer
A sound and impact rubber washer encased in a steel housing pocket intended to eliminate metal on metal sound transfer to the slab

7. Adjusting and locking nut
Adjustment: Nut can adjust to the required length of the steel thread rod
Locking: Nut has an inbuilt vibration proof locking device, to ensure that once locked the dedestal height is static

8. Pedestal Tube
Provides rigidity and stability to steel thread rod

9. Pedestal Base
100mm x 100mm pedestal base that provides a solid weight bearing platform for the access floor. Pedestal base has 4 fixing holes

1. Pedestal Head and Welded Steel Thread Rod
90mm x 90mm steel flat head pedestal designed to provide a solid base for the panel, positioned as perimeter pedestals. A 18mm x 150mm steel thread rod that is welded onto the bottom of the pedestal head with an adjustment range of 50mm +/- from the FFH

2. Locking Nut
Nut has an inbuilt vibration proof locking device, to ensure that once locked the pedestal height is static

3. Pedestal Tube
Pedestal tube provides rigidity and stability to steel thread rod

4. Pedestal Base
100mm x 100mm pedestal base that provides a solid weight bearing platform for the access floor. Pedestal base has 4 fixing holes

Click here for specifiers guide and info >>>Steel Cementitious Ultra Fix System<<<