SC Steel Cementitious Access Floor System
Selection Guide » SC Steel Cementitious Access Floor System
The steel Cementitious panel is a robust lightweight Cementitious panel which is steel encased to help provide maximum durability. The SC panel is the most specified panel in the industry and is regarded as our standard panel for numerous applications.
Panel Size Standard panel
600 x 600 x 35mm
Finishing Panel
600 x 300 x 35mm
600 x 800 x 35mm
Exterior
A grade high density steel with recycled properties
Infill
Recycled Cementitious compound made up of cement and post industrial/ post consumer waste which has unique sound deadening properties.
Panel Construction
These access floor panels are resistance welded together to form a solid steel case. The case consists of an enclosed die formed bottom pan with modular pockets and a steel top sheet. Thicknesses of these sheets vary depending on load requirements.
This steel case is then filled with a light weight Cementitious compound, which has unique sound deadening properties. ASP Cementitious Panels are powder coated in an epoxy paint finish.
Standard Finishes
1. Bare metal pan finish
2. Factory applied High Pressure Laminate (HPL)
Panel Systems
1. Cementitious Stringer less System: SC ultra fix System
2. Cementitious Air Tight System: SC AT System
3. Cementitious Stringered System: SC Rigid Grid System
4. HPL Cementitious System: SC HPL System
Panel Design
The steel Cementitious Panel comes in a 64 cup and 72 cup design.
